One-Piece vs Two-Piece Shielding Can
Which PCB EMI Shield Structure Is Right for Your Application?
One-piece and two-piece shielding cans are both widely used for PCB-level EMI/RFI protection. The right structure depends on assembly, inspection, rework, RF tuning, tooling cost and production volume.
This guide compares the two designs to help engineers and buyers choose the most suitable shielding solution.

Why Shield Structure Matters
Shield structure affects EMI performance, assembly speed, inspection access, rework, tooling investment and total product cost.
What Is a One-Piece Shielding Can?
A one-piece shielding can is formed as a single metal enclosure and soldered directly to the PCB.
- Single stamped or deep drawn body
- Fast assembly
- Good rigidity
- Compact structure
- Lower part and assembly cost


What Is a Two-Piece Shielding Can?
A two-piece shielding can consists of a frame soldered to the PCB and a removable cover attached to the frame.
- Separate frame and cover
- Easy inspection and testing
- Convenient rework
- Suitable for RF tuning
- Easy component replacement
One-Piece vs Two-Piece Shielding Can Comparison
The main structural differences are summarized below.
| Feature | One-Piece Shield | Two-Piece Shield |
|---|---|---|
| Structure | Single body | Frame + cover |
| Installation | One soldering step | Frame soldered, cover fitted later |
| EMI Performance | Excellent | Excellent |
| Inspection Access | Limited | Excellent |
| Rework | More difficult | Easy |
| RF Tuning | Less convenient | Convenient |
| Tooling Cost | Usually lower | Usually higher |
| Unit Cost | Lower | Slightly higher |
| Best Use | High-volume, cost-sensitive products | Products requiring service, testing or tuning |
Advantages of One-Piece Shielding Cans
Lower Total Cost
A single component and simpler assembly usually reduce tooling and unit cost.
Faster Assembly
The shield is placed and soldered to the PCB in one operation.
Compact Structure
The design uses fewer components and requires less mechanical engagement space.
Good Rigidity
A one-piece body provides stable mechanical protection for the components below.
Advantages of Two-Piece Shielding Cans
Easy Inspection
The cover can be removed without desoldering the frame.
Convenient Rework
Components can be repaired or replaced while the frame remains on the PCB.
RF Tuning Access
Engineers can adjust and test circuits during development and production.
Long-Term Serviceability
Removable access is useful for products that may require future maintenance.
EMI Shielding Performance
Both designs can provide excellent EMI/RFI shielding. The structure alone does not determine shielding effectiveness.
Grounding continuity, solder joint quality, opening size, seam design and contact between the frame and cover are more important factors.


Assembly and Rework
One-piece shields simplify assembly because only one component must be placed and soldered.
Two-piece shields require a frame and cover, but the removable cover provides better access for inspection, testing, cleaning, tuning and repair.
Manufacturing Comparison
One-piece shields can be produced by stamping, bending or deep drawing, depending on shape and height.
Two-piece structures require separate tooling for the frame and cover. The frame usually includes engagement features, while the cover requires matching retention points.


Cost Comparison
One-piece shields usually have lower tooling, part and assembly costs, making them suitable for cost-sensitive high-volume production.
Two-piece shields cost more because they require two parts and often two sets of tooling. However, easier inspection and rework may reduce lifecycle cost in serviceable products.
Typical Applications
The most suitable structure depends on production needs and product lifecycle requirements.
Consumer Electronics
One-piece shields are common where low cost and fast assembly are priorities.
Wi-Fi & IoT Modules
Both structures are used depending on whether tuning access is required.
Automotive Electronics
Two-piece designs are useful when inspection or long-term serviceability matters.
Medical & RF Equipment
Removable covers support testing, cleaning and circuit adjustment.
When Should You Choose a One-Piece Shield?
- The project is cost-sensitive
- Production volume is high
- No future access to components is required
- Fast SMT assembly is important
- The design must be compact
- Lower tooling and unit cost are priorities


When Should You Choose a Two-Piece Shield?
- Inspection or testing access is required
- RF tuning may be needed
- Components may require repair or replacement
- The product has a long service life
- The cover must be removable
- Maintenance flexibility is more important than minimum cost

HEXIN Custom Shielding Can Manufacturing
HEXIN supports one-piece and two-piece PCB shielding cans from prototype development to mass production.
- One-piece stamped and deep drawn shields
- Two-piece frame-and-cover structures
- Prototype and production tooling
- Tinplate, nickel silver and stainless steel
- Flatness and dimensional inspection
- Tape-and-reel and tray packaging options
Frequently Asked Questions
Common questions about one-piece and two-piece PCB shielding cans.
Which shielding can has better EMI performance?
Both designs can perform well when grounding, openings and seams are correctly designed.
Is a two-piece shielding can removable?
Yes. The cover is designed to be removed while the frame remains soldered to the PCB.
Which design is better for mass production?
One-piece shields are often preferred for high-volume, cost-sensitive production.
Which structure costs less?
One-piece shielding cans usually have lower tooling, part and assembly costs.
Can one-piece shields be deep drawn?
Yes. Deep drawing is commonly used for seamless one-piece enclosures.
Are two-piece shields suitable for reflow soldering?
Yes. The frame is normally reflow soldered to the PCB, and the cover is installed afterward.
Which design is better for RF tuning?
Two-piece shields are better because the removable cover provides circuit access.
Yes, depending on the PCB layout and retention design.
Common materials include nickel silver, tin-plated steel and stainless steel.
Yes. Custom shielding cans can be produced from drawings, 3D files, PCB layouts or samples.
Need Help Choosing the Right Shield Structure?
Send us your drawing, PCB layout, quantity and application requirements. Our engineering team will review whether a one-piece or two-piece shielding can is more suitable.
