No.158 Xinyang Road Yuyao Zhejiang P.R.C.

News

EMI Shield Case

Hexin products are made of foreign copper-nickel alloy raw materials in accordance with the national standard. In terms of materials, we reject all defects and strictly selectAfter being selected, they are produced by strict inspection and stamping. Compared with other low-end and inferior products, our products are delicate and delicate, and the production efficiency is […]

Read More
IEC Type Connector With Metal shield can

IEC Type connector with metal shielding can for set top box

Read More
What are the requirements for the production of shielding covers?

The shielding cover is generally made of stainless steel for bending and drawing, tinned steel belt tinplate, etc. The main products are radio frequency shields, baseband shields, SIM card holders, LCD frames and other mobile phone precision accessories, as well as electronic products, metal stamping, automatic lathes, springs and other accessories used in medical machinery. […]

Read More
Antenna spring material

Antenna shrapnel is a kind of connector, which is used in the power contact device of intelligent equipment, and the most used is the straight cantilever leaf spring with the simplest shape. The resistance of the contact piece must be small, so it is made of bronze. We often see antenna shrapnel in smart devices […]

Read More
​Benefits of using the shield clip

Shielding clips are clips with metal, suitable for all traditional cable shielding, and can perform EMC-compliant wiring and shorter low-resistance contact transitions. The shield clip has good elasticity and is easy to be tinned. It is packaged with SMD carrier tape, which is convenient to mount, better separate the shielding area, strengthen the shielding effect, […]

Read More
Comparison of various board level shield can materials

Shields are increasingly used in electronic products, but because of the cost of raw materials and the different signal requirements of each product, each company has its own considerations in the selection of materials. At the same time, the price of raw materials varies greatly, and the materials used are also different, but the materials […]

Read More
Introduction to the role, composition and application of the board level shielding can

Composition and application of shielding cover: 1. It consists of outriggers and cover body, the outrigger and cover body are movably connected; the cover body is spherical crown shape. 2. This component is mainly used in the field of mobile phones, GPS, etc. It is to prevent electromagnetic interference (EMI) and shield the components on […]

Read More
Board level Shielding Can Design Guidelines

In the RF hardware design, electromagnetic interference needs to be considered, and the design of the board level shielding cover is essential. Today this article introduces the design specifications of shields and the types of shields. Some considerations about shield design: The shielding cover can be made of Tin plated , or Nickel silver (good […]

Read More
Difference Board Level shielding and SMT Shield Clips

SMT Shield clips are metal clips suitable for all traditional shields, enabling EMC-compliant wiring and short low-resistance contact transitions. Generally, there are products that use wireless communication. Generally, a shielding frame is designed on the circuit board to isolate electromagnetic interference (EMI). Now manufacturers have come up with the use of clips instead of shielding […]

Read More
Board level Shielding Can
Board level Shielding Can Design Guidelines

In the RF hardware design, electromagnetic interference needs to be considered, and the design of the board level shielding cover is essential. Today this article introduces the design specifications of shields and the types of shields. Some considerations about shield design: The shielding cover can be made of Tin plated, or Nickel silver (good soldering […]

Read More